MBC BP-2
The BP-2 is a sturdy, smooth running positioner that will handle the loads and heavy demands of production MIG and intricate TIG welding. The BP-2 positioner handles up to 200 lbs. of balanced load in the horizontal position. The M.B.C. model BP-2 positioner enables the operator to make any angle the correct DOWNHAND angle for fast, smooth welding of small and intricate assemblies. Welders can deposit more metal with fewer passes because weld flows more readily and pools evenly. Welds are more uniform, stronger, and require minimum finishing. The front mounted speed control allows convenient, infinite selection of speeds, both forward and reverse, from 0-18 RPM, depending on the positioner model. The BP-2 features a DC motor with a SCR speed control that is insulated from high frequency interference. The foot switch provides convenient "on-off" control of the table rotation. The easy positioning tilt table provides the exact setting for the best welding angle and highest productivity. The M.B.C. positioner is also handy for chipping, grinding, painting, gluing, and other production operations that require controlled circular movement.
Capacity:
- 200 lbs. balanced load in the horizontal position
- 100 lbs. balanced load in the vertical position
- Table Diameter 12" steel slotted ground plate
- Table Thickness 5/16" Table
- Tilt 10 degrees forward, 90 degrees backwards infinitely variable with hand crank and locking bolt
- Power Requirements 110 volt 60 cycle
- Motor Permanent magnet DC gearmotor 1/12 H.P.
- 90 volt Speed Control S
- olid State DC-SCR High Frequency Filter Fused overload protection with power on indicator light
Speed Range:
- BP-2-A 0-4.5 RPM 102 in.lbs.Torque
- BP-2-B 0-9 RPM 102 in.lbs.Torque
- BP-2-SB 0-18 RPM 56 in.lbs.Torque
- Foot Switch Unit comes with standard duty on-off foot switch-BP-245
- Ground Current 250 AMP
- Shipping Weight 56 lbs. (can be UPS'ed)